Kei ［Model Year：1998-10-2009-08］［Model Code：HN11、21、22S］〈3position type〉
| Part Number (L/R) | 2088.531.1 / 2088.531.2 |
|---|---|
| Price (ex.tax) | 22,000JPY / 22,000JPY |
| Notes | Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. |
| Remarks | Seat position:10mm lower than OEM seat.(Middle position of 3 position baseframe with ST-JJ)10mm to console from OEM seat.MT car interference: a seat cushion and a shift lever at the front position of slider.About models that use rubber caps interfere with B pillar at the rear position of slider. |
| Special information | IS-84 LX(Including JP ERGOMED series)、LS、LT=On center console side, need to change from normal reclining dial to thin type recliner dial(option ＜product number 1600090J＞) and on door side, need to change from normal reclining dial to rubber cap (option ＜product number 1600091J＞) In case of round type recliner dial, need to remove reclining dial on door side. there is interference between recliner dial and center console on console side. SR-3、4、5=On center console side, need to change from normal reclining dial to thin type recliner dial(option ＜product number 1600090J＞) and on door side, need to change from normal reclining dial to rubber cap (option ＜product number 1600091J＞). there is 15-20mm interference between seat backrest and door armrest. Style-J、JJ、JC、D、DC=there is 5-10mm interference between seat backrest and door armrest. Sport-J、JJ、JC、D、DC=there is 15-20mm interference between seat backrest and door armrest. CS=the sitting position will be higher because of spacers usage.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0/5/10mm). Interference can be reduced by adjustment. |
| Baseframe type | New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position). |
| Armrest | Not Applicable |
Matching information
In the LX, LS, LT, and SR, replace the recliner dial on the center console side with a thin recliner dial (sold separately; 2200Yen), to avoid (alleviate) interference with the car. Remove the recliner dial on the door side to avoid (alleviate) interference with the car; after removing the recliner dial, install a rubber cap (sold separately; 1100Yen). LX and LS with a round recliner dial cannot be installed.
Classic LX Pepita / Classic LX Spektrum
In the LX, LS, LT, and SR, replace the recliner dial on the center console side with a thin recliner dial (sold separately; 2200Yen), to avoid (alleviate) interference with the car. Remove the recliner dial on the door side to avoid (alleviate) interference with the car; after removing the recliner dial, install a rubber cap (sold separately; 1100Yen). LX and LS with a round recliner dial cannot be installed.
LX-F (Based on IS-05 structure)
In the LX, LS, LT, and SR, replace the recliner dial on the center console side with a thin recliner dial (sold separately; 2200Yen), to avoid (alleviate) interference with the car. Remove the recliner dial on the door side to avoid (alleviate) interference with the car; after removing the recliner dial, install a rubber cap (sold separately; 1100Yen). LX and LS with a round recliner dial cannot be installed.
New Orthopead (with RECARO Vent)
RCS side adapter set is necessary (item sold separately).
RCS SIDE ADAPTER SET: 1700003J
RCS SUS SIDE ADAPTER SET: 1700004J
SR-2 late model / SR-3 / SR-4 / SR-5
In the LX, LS, LT, and SR, replace the recliner dial on the center console side with a thin recliner dial (sold separately; 2200Yen), to avoid (alleviate) interference with the car. Remove the recliner dial on the door side to avoid (alleviate) interference with the car; after removing the recliner dial, install a rubber cap (sold separately; 1100Yen). LX and LS with a round recliner dial cannot be installed.
AM19 SPORT-D/DC/MAGNIFICA CL222HV
