4C ［Model Year：2014-07- ］［Model Code：96018］
| Part Number (L/R) | 2030.002.1 / 2030.002.2 |
|---|---|
| Price (ex.tax) | 22,000JPY / 22,000JPY |
| Notes | Cautionary note: After install RECARO seat, side airbag is not available.(There was no SAB system as of 2018 Dec). Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. For 96018 The car which has special option is unconfirmed. |
| Remarks | When this baseframe was developped, there was no SAB system. But if the car has SAB system, you need to cancel airbag warning indicator. And there was no occupant sensor at thet timing.(As of 2018.Dec). Seating position: RMS: Height= Same with OEM seat using most highest position of RMS side adapter, 15mm lower than OEM seat using 2nd highest position of RMS side adapter, 27mm lower than OEM seat using 3rd highest position of RMS side adapter. ( In addition you cannot use lowest hole of side adapter due to interference with sole of RMS.) RS-G: Can be 3mm lower than OEM seat using lowest position of RS-G side adapter.(you cannot use highest hole of side adapter). Handle offset is 5mm to door side from handle center. The length of slider is 10mm longer than OEM slider. But in case of RMS, you cannot use half of slider on rear side due to interference.e. In case of RS-G, you cannot use 30mm from rear end on slider and not use upper hole of RS-G side adapter. |
| Special information | There is limitation of slide movement. It depends on install position. In case of RMS, you cannot use half of slider on rear side due to interference.e. In case of RS-G, you cannot use 30mm from rear end on slider and not use upper hole of RS-G side adapter. RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0/5/10mm). Interference can be reduced by adjustment. |
| Baseframe type | New-type frame. One-position type. |
| Armrest | Not Applicable |
Matching information
PRO RACER RMS side adapter P/N 1700002J is necessary (item sold separately).
Side adapter set P/N 1700000J is necessary (item sold separately).