Z3 ［Model Year：1997-01-1997-05］［Model Code：CH19、CM32］
| Part Number (L/R) | 1014.051.1 / 1014.051.2 |
|---|---|
| Price (ex.tax) | 22,000JPY / 22,000JPY |
| Notes | Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Only for Roadster Anniversary model. |
| Remarks | Recommendation: If your belt buckle has tensioner, Replace standard belt buckle with BMW E30's belt buckle which has no tensioner. But you can not use tensioner function no longer. Interference: between slide lever and console at front position of slider. Armrest conflicts with seat backrest. |
| Special information | IS-84 LX(Including JP ERGOMED series)、LS、LT need thin type recliner dial(PN 1600090J) to replace standard recliner dial on inner side and need rubber cap(PN 1600091J) to replace standard recliner on door side.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0/5/10mm). Interference can be reduced by adjustment. |
| Baseframe type | One-position type |
| Armrest | Not Applicable |
Matching information
In the LX, LS, LT, and SR, replace the recliner dial on the center console side with a thin recliner dial (sold separately; 2200Yen), to avoid (alleviate) interference with the car. Remove the recliner dial on the door side to avoid (alleviate) interference with the car; after removing the recliner dial, install a rubber cap (sold separately; 1100Yen). LX and LS with a round recliner dial cannot be installed.
Classic LX Pepita / Classic LX Spektrum
In the LX, LS, LT, and SR, replace the recliner dial on the center console side with a thin recliner dial (sold separately; 2200Yen), to avoid (alleviate) interference with the car. Remove the recliner dial on the door side to avoid (alleviate) interference with the car; after removing the recliner dial, install a rubber cap (sold separately; 1100Yen). LX and LS with a round recliner dial cannot be installed.
In the LX, LS, LT, and SR, replace the recliner dial on the center console side with a thin recliner dial (sold separately; 2200Yen), to avoid (alleviate) interference with the car. Remove the recliner dial on the door side to avoid (alleviate) interference with the car; after removing the recliner dial, install a rubber cap (sold separately; 1100Yen). LX and LS with a round recliner dial cannot be installed.
PRO RACER RMS side adapter P/N 1700002J is necessary (item sold separately).
New Orthopead (with RECARO Vent)
SPGN Side Adapter set P/N 1600110J is necessary (item sold separately).
Side adapter set P/N 1700000J is necessary (item sold separately).